Recent content by Kalibre46

Thanks Ian, I really hadn't considered doing that. I guess I was concentrating on having the project all finished and gleaming, but there is some merit in leaving it for sure. Cheers.

Hi, I'm extending my driveway with more permeable brindle block paving (+35sqm). The existing driveway is grubby and needs a good wash and re-sand. The new blocks are second hand (so that the weathering kinda matches) and also in the same state of needing a good wash. Cleaning 2000 unlaid...

I didn't know that this existed, very interesting! I will have to do some digging (figuratively and literally).

Thanks. The size definitely brings in some challenges.

I've heard this, but wasn't sure if this was an official written or unwritten rule, or simply down to the individual building control officer being prgamatic. Any ideas? I'd hate to commit to a design building this advantage in only to find they say no.

Thanks for the info. The idea of smaller buildings is one that I had considered actually, mainly because there is a slight gradient across the garden, nothing major but enough to make the 2.5m max heigh a challenge end to end without digging down at one of them! Smaller buildings could mitigate...

Thanks, very interesting. I would be at the boundary on three sides (all just fences, no neighbouring buildings). The only windows would be on the fourth side facing back down the garden towards the house.

Thanks all. Some food for though there. One other question, is there any limitation on how close we can build (under PD) this structure to the boundary? Anything in regs for minimum access etc? Cheers.

Thanks John. Yes I have done, it is for a garden office/gym. However given the placement of the building and the proximity to neighbours I wouldn't really want it higher than 2.5m anyway, so it's kind of a mutual limitation if that makes sense. I would be worried that if rejected as well for any...

Hi, I'm hoping to embark on a rather large (50sqm) garden room project. I'm looking to do this under permitted development so I will be limited to a total height of 2.5m above ground level. It will of course require building regs approval because of electrical work, boiler etc. I was hoping...

Thanks for the replies. It's the former, i.e. a long post (6m) fixed at one end and then cantilevered in the middle. The end post and the middle post heights are mm perfect so the 'bend' is just in the last 3.25m. Thanks for the info. I've passed this along, however given the cost involved...

Hi, the steels are all the correct size and I don't rally think it's a case of deflection as there is no load on them as yet, it's actually that the centre steel was produced 'bent' for want of a better word at one end. The steel company say that this degree of bending (40mm) is within their...

Hi, We've just had the first part of a large steel structure installed for our house extension. The key feature of this room/house is that internally there will be a two storey ceiling with one corner being a combination of bi-folding doors and fixed glazing above. The cool part is that there...

Thanks again for your detailed reply. Like I've mentioned in my post above, I take a good look at everything and decide if it is indeed the right approach to adopt.

Not at all, from what I've heard it is not 'wrong' it merely isn't best practise and/or the most efficient use of time/effort in various situations. I would not do it in my home because my home is of a standard construction with existing standard systems and I would demand a certain level of...