Recent content by keithfatbloke

thank you for the reply woody, thats just the sort of info i was looking for.............now off to find myself a carpenter

well as i said in the post i have all the materials and some are into new casings so may only need a trim of top or bottom and some into existing casings so may need a bit more trimming and all will need hinges and handles etc fitted, all i really would like to know is what any of the carpenters...

I would like to have my new internal doors hung by a carpenter who will make a proper job of them, so i am wondering what would be a reasonable cost to pay for each door. I have the doors (oak panel) the hardware and stops, some are going into new casings and some existing. Thanks as always for...

nothing done in the kitchen

thanks festa, the BQ looks like what i,m after, can't find the wickes, do you have a link

thanks guys

i have just had a look at my consumer unit and it says NSB32 on the trip labeled cooker, now i am sure they said 60amp for the hob, from what you have said i think i am ok, do you, thank you for your replies btw

it's a John Lewis own brand hob http://www.johnlewis.com/230220070/Product.aspx should it not have been 60amp

can anyone recommend lights that i can fit in the kick panel under the front of my kitchen units please, i have searched all over the interweb and found nothing

I got a new ceramic hob from John Lewis and i cannot find anywhere on it or in the instructions what amp it is. The electricians put in a 60 amp switched line for it to be connected to so i am wondering if i use 60amp cable and it's not a 60 amp unit will this cause any problems to the hob...

just wanted to up date this and thank you for your replies. after discussions with the builder and him to electricians the price has dropped to £200, but they did add that other bonding was done ie all the new water pipes and ch pipes. Sorry, i feel i missled you now with my post as i did...

yes

just had another look and the original earth bondings are 1 to the gas m ain and 1 to the electric main coming up from the ground before the consumer unit, all 3 earth bonding cables go to a connection block on the board and then into the commsumer unit. Thanks for your replies i really...

it was done during the second fix, but as i said earlier it still has not been connected to the main yet

thank you for the very quick replies, we are near the end of an extension and have had lots of new sockets and lights etc and on the bill of quantities from the builder all the prices are broken down so i know how much each socket etc is costing me and thats how the cost of the bonding jumped of...