I guess its possible that the stat isn't working properly. As I mentioned above the temperature had been set to about 55 and turning it up to 65 didn't make a lot of difference....
Hi
I've got a problem with a cylinder (below) that only seems to produce lukewarm water :
The water pipe going into the cylinder from the boiler system (shown below) is red hot when the hot water is switched on :
But the pipe at the top of the cylinder is only lukewarm to...
Didn't realise that it should be that easy to rotate the shaft. I'll try the silicone lubricant.
The plastic clips holding the springs look intact to me, but difficult to see clearly as what looks like a motor of some description is in the way.
The label has dropped off my actuator, but comparing with images online it looks like its stuck on H at the moment.
I take it I should be disconnecting from the power supply before removing the cover etc.
Hi,
I've got a Drayton M1 3 port mid position valve controlling the Water / Heating flow in my house.
At the moment the radiators always come on, even if the thermostat is turned all the way down and heating is set to off on my programmable timer.
If I unclip the actuator from the valve...