Recent content by L33sparky

cheers pal thanks for your help.

nice one thats sorted it. what setting does the landing have to set to for going to bed?

in diagnostic mode on the input menu that all my zones are set to c and the unused zones are set to 0

yeah i have removed the jumper pin will check the diagnostic mode and come back to you

wont set in a will only set in b yes b is the landing

the alarm will only set in B ? yes i have assigned the zones to the relevant abcd settings in the attributes setting i have programmed as follows zone 1 is tamper 2 final door/ exit and (main door contact) 3 intruder (lounge pir) 4 intruder (kitchen pir) 5 intruder (landing) 6 intruder (back...

yes ive programmed all the inputs/zones and named them

hi Yes its set to double pole on the keypad

Hi Can any of you tech guys help me with a problem on the above system? I have installed the system and wired it up as a double pole set up as per the manual the problem is that i cant for the life in me find any of the zones to program when i try and do a walk through test it doesn't show...