Recent content by LarryN

  1. L

    Triton T80 Easy-fit running hot and cold

    The diagram I've got looks different. So you think it would be a replacement for 10? It looks like it unscrews rather than being soldered. https://www.showerspares.com/triton_shower_spares/triton_all/triton-t80-easi-fit-plus-electric-shower-t80-easi-fit/
  2. L

    Triton T80 Easy-fit running hot and cold

    Ok. I've worked out that I've got the 9.5Kw version of the T80. I've just tested the flow. With it turned fully to cold I'm getting about 7.5LPM. With the heating in the middle about 4LPM. No low pressure warnings. No plumbing has changed in the house for a long time and no-one else around to be...
  3. L

    Triton T80 Easy-fit running hot and cold

    Thanks. Debating whether it's worth getting someone in, or getting a new one if it's not the pressure. Seems a bit crap given it's only just over 2 years old.
  4. L

    Triton T80 Easy-fit running hot and cold

    Sorry for the late reply. So turn to fully cold and measure the output for 15 seconds? I'll try and do that tomorrow to see what I get. The T80 easi-fit is 10.5Kw. Does that make a difference?
  5. L

    Triton T80 Easy-fit running hot and cold

    Hi, I've had a Triton T80 Easy-Fit for just over 2 years and it's started running hot then cold. It's been fine before and nothing has changed in terms of plumbing in the house. Set at full power, temperature knob in the middle it'll run for 2 minutes hot, then 1 minute cold, then hot again. The...
  6. L

    Leaking toilet from base of cistern only when flushed

    I've got the cistern off ok and took the heavily flattened donut with me to the plumbing spares place, but we couldn't work out whether it was a 1.5" or 2", so I got both. I squeezed (and it was a squeeze) the 1.5" over the hexagonal fitting on the base of the cistern and reconnected it all, but...
  7. L

    Leaking toilet from base of cistern only when flushed

    I didn't think so. Thought I'd check though.
  8. L

    Leaking toilet from base of cistern only when flushed

    Hi all. I've a toilet that is leaking from the base of the cistern only when it is flushed. Most of the water runs down the nuts and onto the floor. Most of what I've read suggests that it should be a case of taking off the cistern and replacing the rubber washer between the cistern and bowl...
  9. L

    Dripping Kitchen Dual Lever Mixer Tap

    Thanks a lot for the help and info. I'll explain to the other half the issues. There will be a dripping tap in a months time no doubt.
  10. L

    Dripping Kitchen Dual Lever Mixer Tap

    There's no magical way of working out what make/model of tap it is? It's not got any obvious branding on it.
  11. L

    Dripping Kitchen Dual Lever Mixer Tap

    Obviously that has crossed my mind, but we're selling the house and am loathed to spend money we don't need to on it.
  12. L

    Dripping Kitchen Dual Lever Mixer Tap

    Is them falling apart a common problem? I've got a couple of decent plumb part suppliers nearby. Are you suggesting that I'm going to struggle getting a match locally then? I'm not sure I'll be able to convince my other half to live without a kitchen tap for days whilst waiting for a replacement.
  13. L

    Dripping Kitchen Dual Lever Mixer Tap

    My partner has a dripping mixer tap. Pretty sure it's the cold that's dripping. Would this just be a case of replacing the cartridge? I've no idea of the make/model of the tap, so is there any way of telling the type/length of cartridge required without opening it up first? Or is it going to be...
  14. L

    Quick fix suggestions for external rendering coming away from wall

    Thanks. Well it was obviously the estate agents job to look at the house and what work needs doing and price accordingly. It was just whether there was any cosmetic fix to not put people off as the first thing they spot coming through the gate. As you say the surveyor would spot that the whole...
  15. L

    Quick fix suggestions for external rendering coming away from wall

    Thanks. Looking at it, if we were to get someone in to do it how much of the rendering would need to come off do you think. Can you just take off the patches where it has come away and re-render just those parts? I've never had it done, so have no idea.
Back
Top