Recent content by lawrenso

will get one up shortly Cheers

Thanks for the response big-all. What I am on about is that the newel that is in is sectional with the bottom being 90mm, then a turned middle section, then the ball on the top. From the fusion instructions, even if I remove just from the turned section up, there is not enough left from...

nobody ???

Well, after a google I think I found the answer from AWBCM - it is a no :oops: so my next problem - what to do? They are sectional newel posts as well so are already hollowed out as I thought about making the Fusion Newel there a bit longer and trimming the bolt to length taking account of...

Hi All, I hope you can help with my wife's latest wish (or rather "want" :wink: ) She loves the Richard Burbridge Fusion add on and wants to remodel our staircase which is poor quality - bad staining, paint under stain - bad cuts (NHBC - it's a staircase and it works :x bunch of useless...

thanks for all the replies guys When I said red - this is when wet - what I gather is the high sand content?? Cheers Steve

Hi Blagard, can't get my head round the bit above - could you clarify please. Would the mortor in the rest of the wall be an issue with it being soft as it is retaining? Cheers L

Hi All, We have an outside wall - part retaining as house is lower than the road, and it is topped off with red engineering brick - ie smooth and slightly glazed - laid on their side. They are not solid. Our neighbour has the same. I noticed the other day a large number of these bricks...

Thanks for your replies guys. I will have a stab at fitting a Magnaclean to the system - on the return I believe but will have to wait until after holidays in a week though - but while it is still mild if it takes me much longer. That can still be used with the new system - in fact will get...

Hi Tony, we have had a whole list of issues with the boiler - the worst (as such - dec 27th - subzero in the daytime - it was personally bad even though it was a frozen overflow pipe). I go away a lot for work - both in the UK and abroad, and my wife is as technical as a rock and has no...

i have had nothing but problems with an Alpha CB50 - but if I hadn't and seen the post above by Alphaman - that would smack me as a bit of desperatism on somebodies behalf (sales down on his targets etc) and would put me right off. By the way - our Alpha was fitted by the builder Lawrenso

Thanks - came yesterday (a day early!!) and sending somebody back today who has worked on our one before - methinks they are scared of it :twisted: God knows - I am fed up of it!!! lawrenso

OOOps - sorry - I had it the wrong way round then :oops: Thanks for the correction Steve

I think that is your answer - I bet if you look on your bill your are being charged metric - (MI or M(cubed ie to the power of 3)), They have swapped you over to Metric billing without changing the meter. Go to an imperial->metric converter on the web and compare what a foot cubed is compared...

Explansion vessel was done at Christmas when they fixed it. As for the pressure sensor - is this accessable to check - been an hour now and still flashing!! thanks for the quick response lawrenso