Recent content by lee1982

I could do with some help, we got a company to install some bi folding doors in my mothers house paid 25% deposit upfront, they then messed her around before the instillation saying they would install the windows on a certain date, to then cancel saying there was problems with the...

im gonna need alot of luck! i know my terminology will let me down! thanks for the input, i have to be there for 6 so prob will start at 6.30!

dont think im ready for the exam myself, its tomorow at 6 (not sure how u know roughly :) ), though i will give it my best! think a break has helped been at it since 7. if the lowest protective device has a breaking capacity higher than the PSC at the origin then you dont have to take...

still none the wiser! last sentance on 54 before 2.2.17 phase sequence is this where the protective devices used at the origin have the necessary rated breaking capacity and devices with similar breaking capacity are used throughout the instillation, it can be assumed that the regulations are...

doing revision for 2391 exam and i cant seem to find the answer to a question, would appriciate any help, i may just be missing the obvious here. :x state under what circumstances is it unnecessary to carry out a prospective fault current test at each sub-main distribution board on a...

i have done, thanks

I went up before, some of the insulation was covering the crossflow ventilator (Plastic things :P ) at the top and even some were blocked at the bottom as some had been rammed that far down it went into the eaves touching the soffit vent. not all though, some were okay, one had that much forced...

Okay thank you for that, ill go back up again make sure both sides arent blocked and ill put the spare insulation back down but not close to the ends so im not blocking any ventilation, as far as im aware there is no harm in having two layers of insulation Ill make sure we use the extractors...

now in the very corners there is small peices of insulation stuffed in. is it mean to be like this, in this pic you can see the middle one i have removed. So on one side of the loft i have removed the double layer and removed the insulation in the very corners, is this how it is meant to...

okay ive been into the loft the roof timbers do look wet in the pics but it doesnt seem that bad when i had a look they are slightly wet were there touching the roof felt as i would expect with all the condensation on the felt. im not sure what you mean by the eaves. The loft has wooden...