:oops: Hi, Sorry I wasn't more specific with details of the lights.
We're removing the single light fitting (a ceiling rose) and replacing the lighting with 4 individual downlighter spots; all 4 of which are designated suitable for use above a shower. 2 are only above the toilet and wash...
:?: Hi,
We want to fit replacement lights in our bathroom, using the existing on/off (pull cord) unit but replacing the single light fitting with 4 spotlights (suitable for all bathroom zones). My husband is quite competent to rewire the 4 spotlights from the single original light fitting...
I had real difficulty purchasing the mapie coloured grout originally ... even though Mapei had sent me samples it took me ages to find a supplier of the colour I wanted ... I wish I'd found 'europeanheritage.co.uk' when I had originally searched.
I've just emailed them about supply.
Thanks
Many thanks for all that information ... I think I might use my pale blue grout as it's only between 2 tiles [as the other 3 sides of the hatch can be in white silicone as they are beneath the blue tiles (a flat top/shelf) butted up to white tiles] ... so thanks 'leakydave'.
For anyone...
I need to use silicone sealant between a couple tiles to enable that one join to be broken if we need to open an access hatch.
The tiles are grouted elsewhere with a pale blue grout (Mapei).
I can't manage to find any pale blue silicone sealant ... is there any way to colour a small amount...
Many thanks 'dal5band' ... we tried the 'extreme' measure of putting mains water UP the system which did push a lot of air up into the header tank ... BUT the Water was still not flowing through the pump.
MANY MANY THANKS to ChrisR ... what a brilliant idea to temporarily reverse the pump...
I've got the pump on full speed and I'm sure pump valves are open;
I've also tried 'locking' the mid-position valve in mid-position.
Yes there is a dribble of water when I take off the pump rotor bleed cover.
This idea had crossed my mind ... now you've also suggested it I shall try it...
Hi,
Hot water/Heating/Boiler ... problem with water flow; any advice please:
Boiler is 15 years old ... pump & mid-position valve are new.
Our boiler fires up but turns off after a couple of minutes ... when the water in its pipes gets hot. If it's left to cool it will fire up...