Recent content by lloyd142

Hi I'd appreciate some advice on the following. I've tried to find existing info on this topic, but nothing specifically seems to answer my query. I have a room part screeded and part suspended timber. Screed already has wet underfloor heating which I want to extend into the timber floor...

Ok cracked it - just before I was about to call the plumber through desperation. The boiler was shutting off because there was air in the system (I could tell that when I switched the boiler on it fired up, gurgled for a bit and then stopped heating). Above the red tank there was a release...

Brilliant. That's restored the pressure and it's now reading 1.5 bar. I've bled the system and there's definitely water in it now. For some reason nothing's getting hot now though. After switching the heating/hot water on the boiler lights up, but then seems to go into standby as if the...

Do I need to restore the pressure in the system somehow? I see a small red tank in the airing cupboard with a pressure gauge on top which reads 0 - I assume this should not be giving a pressure of 0?

I drained the pipes as well as the radiator when I removed it. I haven't tried bleeding the other radiators. From what I can tell the bathroom radiator is on a different system - for it to come on I just have to have the hot water on even without the central heating.

Hi. I recently moved into a new build. The heating system seems to be: Boiler: Icos HE12 Ideal Water tank: Tribune HE Yesterday I switched the radiator in the bahtroom for a heated towel rail. To do this I switched the heating/hot water to off at the control unit ( I didn't switch off any...