Recent content by lokkar

Yes tried clockwise but looks moved half a turn only.. Will stop from the mains to reaplce the washing machine.. Not sure what to do about waste pipe.. Any ideas pls

Hi all, The washing maching broke down and a new one is on the way. But while checking the connection it is a bit worrying. Got the inlet valve via a old round stock tap which is broken as well. Also the outlet is attached via a tape. Help needed for the inlet valve stop tap.. On how to...

all the radiators are working fine... it is just that when i bleed the non working radiator... new water is not being filled in at all.. so worried that it might have a seperate connection which the installer forgot and capped it out

anyone pls any pointers

ok, so i think the issue is different.. we had replaced the boiler to combi this summer.. and may be the plumber didnt connect one pipe after removing the hot water tank... below is the photo attached of the work done.. if the bottom left pipe needs to be connected somewhere pls ? the thick...

found them.. they are the last image type marked in red.. phew... so will bleed the radiator out and close all others.. the worrying part is that the pipe near it are not worm as well.. may be blocked from somewhere ?

this is something i am unable to find on this ... as seen in the photo.. the edges have a connection .. this is like panel radiator with 2 panels attached.. any pointers where this screws can be pls ?

anticlock wise both is open right.. and there is no air vent screws on this at all.. tried finding under over back and front.. not sure which brand it is .. and yes the pipe not getting warm is another issue ... will still try the above method to see if it works. .

hi, Have got one radiator in a 4 bed property which is not working. It is an old style boiler and the pipes around it are not warm as well. This does not have any area to release pressure. any pointers pls . thanks

6x3 and house is build circa 80s

yea it is just the living room and not the whole house. so running just that instead of whole house will be cheaper as we spedn most time in there ... considered the hot water ufh but to0 costly

hi all, i am planning to get the underfloor heating before the new carpets gets in. is it simple diy task apart from electrician part.. please let me know

hi all, i recently bought a link detached house and have the floor plan as attached. We would like to have a bedroom downstairs with open plan kitchen. any ideas or suggestion on how to achieve without extending. Not worried about converting the garage as well. Thanks in advance