thank you for your advice, but I have only a few weeks to get it moved and the new owners def don't want it left.
As you say its is worth more as a tank than scrap but I've offered it for FREE to 2 diving comps that make/repair and sell them if they can collect but they ain't interested...
first off the caravan is only use 1 week of the year at havens lol.
The tank is an oxygen chamber made in 1980 and originally from a north sea oil rig.
We bought the tank about 8 years ago and was use 4 times a week for my daughter who has cerebral palsy, we drop the pressure down to approx...
As the subject says I have an tank I need to scrap but its to big and heavy to move so I need to cut it up.
its 9ft long and 34inch barrel and must be about a ton, its 20mm thick so angle grinders would take years :-(.
so I need to know what I could hire that do the job?
thx Michael
I have just try this, and it did'nt trip been back to b&q swap the cheap **** one for a better one prob sorted.
Thank all for ya help!!!!!!!!!!!!!!!!!!!!!!
Thx for the quick reply, light and wiring are all good!!!
I know it being on a plug ain't the best idea but as i only be using it a few time a year for bbq ect would it b ok on a 3amp plug?
Hello, i have just replace an old Flood light in the garden.
The old one had never work since moving in and look older than the house.
I have replaced it with a like for like (500w PIR Security light). The old one was fitted to a Plug with a 13amp fuse which was pluged in via a socket in a...
Thanks for all your help!!!
i have just call out an A/C engineer, paying £285 for all the copper, fitting, and then using a vac pump - a good investment - thanks for all ya help :lol:
when bending the pipe i put a kink in it and after trying to take it out it broke(hows ya luck)
i think it is still could work if i cut it, and re flared it -
But how do u flare a pipe ?
no thats fine i broke the pipe b 4 i open the valve on the outside unit,
with the price i have just seen on line 6mm pipe @ £6.50 a meter and 12mm @ £9 as i want 4 meters of each thats just over £60 of copper is labour that much (£240) to bend some copper (without bulls in it up lol)
He did'nt say-
but on the instructions is says u don't need to purge the system.
just once connected open 2 allen key bolts (and i think thats should blast them clear) but i have been advised i should use a vac pump and bin the instructions lol
i am fitting a DIY split air con unit - but as a complete c%^k that im am i have broken the soft copper pipe!!!!!!!!
So i am trying to get some idea what it should cost to come and replace
- 4 Meters of 6mm
- 4 Meters of 12mm coper pipe and fit it just incase i bulls it up again!!!!
i...
hello thanks for your help -
The roof is made up of 4 rectangles, and 7 triangles.
:? sorry to be thick but whats enclosing cassette's coz 85% blackout would be just about workable!!!
and what kind of external covering is poss?
Many thanks :D
Hello all, i have a polycarbonate roof which i need to blackout.
is there any film or paint that can do this - the area is only 3m2 but blackout blinds will cost the best part of 2k!!!!
Many thanks
Michael