Madrab's latest activity
-
Madrab replied to the thread Dishwasher Waste.As long as you weren't extending the waste too far and could get the fall then that would be the ideal, though the pump in the appliance... -
This saga is nearly over. I have learned some new things, which is always good, isn’t it? Last time I posted I was going to get a TCT...
-
Madrab replied to the thread Drilling a cast iron soil pipe.Just get a little silicone adhesive in there, yeah the OB1 should do the job. Dry it all out thoroughly and no need to be excessive...
-
Madrab replied to the thread AC on old warm air ducts?.Guess it would all be down to capacity, volumes and fan output I would guess and whether the output of the AC unit could deliver through...
-
I’m not sure why you think he’d have loads in his van. I carry about 2 bottles, but that’s because I work in social housing and can’t be...
-
Madrab replied to the thread Radiator inhibitor.Does the system have a specific mag filter make? If so go with their inhibitor as that what may be in it already Any of the 3 main...
-
Used to be a system I saw many years ago that allowed you to cut a large hole into the chipboard and then cover up with their ready made...
-
Madrab replied to the thread Moving a radiator with chipboard subfloor.Had it many times - Install this designer tubular rad please > it's the same output as the old Type 22 conventional convecting rad, so...
-
Madrab reacted to ChrisJP's post in the thread Moving a radiator with chipboard subfloor with
Thanks.
I agree. I had a larger version of the Milano tubular radiator in my main bedroom and, although its BTU rating was adequate, it failed... -
Madrab replied to the thread Moving a radiator with chipboard subfloor.What you have linked to isn't a column radiator (rad) I'm afraid - it what is called a tubular designer rad. They look great but can...
-
Madrab reacted to CountryFan's post in the thread Vaillant ecoFIT pure 415 - Faulty Panel Seal with Thanks.
The seal for that opening is what makes it room sealed and is formed by the newer Vaillant by having the rubber seal form part of the...
-
Madrab reacted to dilalio's post in the thread Vaillant ecoFIT pure 415 - Faulty Panel Seal with Thanks.
And now you know why repair costs from independent engineers always seem pricey! Parts prices are through the roof and we lose jobs...
-
Madrab replied to the thread Heatmiser Neo air thermostats.Yep - To stop that then every stat would need changed. In the stats options menu, set the failsafe option (P3) to 0. How to set that...
-
Madrab replied to the thread Heatmiser Neo air thermostats.I'd be tempted to suggest that they run them as normal and have them all with their own batteries, one set of batteries to power...
-
Madrab replied to the thread Heatmiser Neo air thermostats.Not sure why there would be any wires connected to a NEO Air as it should all be wireless, apart from the floor sensor. The NEO stats...