Recent content by manx

model is wma 34

hi if it is a conden,, t/d then it could be the timer. as i have had this fault before .

hi i have got a hotpoint w/m that will not start i have put a new interlock on it. the door light keeps flashing.

i have a slimline zanussi disher washer that will not heat the water. it is a computer board type. every thing works ok apart from the heater

have a look at your drain hose it might be to low

it also could be your timer that has the fault on it

try and test the solenoid to see if you have power to it

hi keep away from hotpoint as they are crap and hoover. and dont get a digital machine there a pain.

thanks for your help found fault on timer unit. thanks all

hi i have a tacho i can sen you

hi it could be the motor or the carbon brushers on the motor. unplug machine befor you look at it

if you follow the waste pipe into the machine u will find it . if the machine has a cover on the back held on with screws take the cover off . you should find the pump easey as the wast pipe goes into the pump. and it is not bad to replace. i have done alot off them. remove the plug from the...

could be your pump is blocked or u will need a new pump

____________________________ Lynda, moderator please continue with your origonal post which is here

thanks to all who told me about the exhaust stat i did look at that and tha is ok