Recent content by Mark1919

Here is some pics ive got the lenght of cable out the middle to rule that out for sure

Hi guys i wonder if anyone can give me some helpful advice i have just picked up a 3 seater sofa with 2 inbuilt electric motors , each motor has a plug in 24v transformer lead one of the leads powers both sides but the other lead will not power either side i have check for power coming from...

Yeah the pic i have on here are of the external cracks but the cracks in the artex are on the ceilings

Also yes the cracks in the artex are on the ceiling

Hey thanks for your reply sorry for not more detail The cracks in the artex did seem to run in lines but some was wavy there was also cracks running like fork lighting down the wall on the stairs The images are of the detached end of the house that one runs right down the middle of the...

Hi guys we have been looking at a property that has caught our eye however after viewing there is alot of cracks on the inside artex and one running down the outside wall can anyone suggest if this could be a big issue or not many thanks

Hi guys can anyone on here give me some advice me and my gf are looking to buy the house that has came up for sale over the road from us since the current occupiers have moved out and put it up for sale the next door neighbour has pulled down the dividing hedge that splits the property and...

Hi guys my k750 husky saw needs a new coil i have looked on the net and there seems to be 2 kinds for the k750 on with 2 terminals on and one with just one on , i have attached images of the two kinds can anyone tell me what the one with 2 terminals is for ?

Its not the expense im thinking about but i have bought every electrical part in this fan apart from the turner motor so i basically have a full new setup but its not working... so unless i blew the new pcb board with the old motor like others suggested...

So the motor finally arrived today and guess what!! It still has no sign of life just a very faint buzz from the board...

Yea checked that with a meter there was a slight hum from the board when plugged in dyson says there motor is out of stock so i have to wait till there have it back in stock....

Also when i powered the fan up with the new board and left the motor disconnected there was still no sign of life

Yeah am not sure i can only think with it being such a complex motor the motor has burnt out causeing the system to not work

New control board fitted and lcd pcb fitted and still dead.... still waiting on the motor arriving so its all it can be now

When i spin the motor by hand it does not run smooth , you can turn it but there is a stiff resistance feeling that kind of judders