Hi, I have a three gang light switch in the Kitchen. 2 of the switches are on one circuit and control the main kitchen light and unit underlights. The third switch of the 3 gang controls a conservatory light but is on a different lighting circuit (eg a different MCB at the consumer unit) Is this...
On a slghtly different note JohnD, i'm having a bathroom re-done and am fitting 6 downlighters which are the waterproof type for shower/bathroom areas.
They each come with their own transformer and leads which the blurb recommends is connected to the 1mm lighting cable with connector block...
On a slghtly different note JohnD, i'm having a bathroom re-done and am fitting 6 downlighters which are the waterproof type for shower/bathroom areas.
They each come with their own transformer and leads which the blurb recommends is connected to the 1mm lighting cable with connector block...
Many Thanks QED & Pompeysparks.
The ring main drops down from the bedroom above, where there are some short screwed 'inspection' floorboards, so will connect under this floor with junction box to properly extend the ring.
Thanks again
I've moved into a 1960s property and have noted that a number of sockets are spurred off the ring main.
There is only 1 double socket on each spur, so no problem there??
However in the living room the ring main has been extended with 3 additional double sockets on a new 'ring' of 2.5...