Recent content by mathewg

Looking a putting in a Mira Platinum digital shower, HP version. These ok to use with plastic pipe and speedfit connectors.

You are correct, fecking crap installers they have used this http://www.wickes.co.uk/polythene-dpc-150mmx30m/invt/226580/

Thanks, but that is what I have, that looks rigid. What I have is flexible and looks like it comes on a role but its not sticky back stuff its just flexible plastic.

I need a short strip of what looks & feels like a plastic liner material that comes out underneath the tiles on the roof and into the gutter to guide the rain water in as a piece has come off my roof and therefore rain water is dripping behind the gutter and running down the fascia board. I...

We want a feature colour (dark colour) on one wall and a light colour on the walls at 90 degrees to it. Whats the best way to get a nice sharp edge on the dark colour as the walls join. Masking tape? or is there another way as in the past I've used masking tape only to peel it off and it has...

I'm mounting a TV on a wall bracket in the dining room, going on an internal plasterboard wall. In the mount bracket box there are 6 12mm diametre rawl plugs and bolts. I've measured and marked out where it will go and have noticed some parts of the wall are hollow and some are solid...

Problem was he was not sure either :roll:

Electrician has wired in a Lutron single maser Rania dimmer (450w rated) that powers 5x35w downlighters and a bathroom tile fan which is also on a isolater switch. Before anyone asks the dimmer switch is not in the bathroom its on the landing wall. When the dimmer is put on to almost full...

deleted

Well I would of hoped MK would of diagnosed a faulty PCB if that was the issue because they are Boilermate experts, they did not so I trust their opinion. Both pumps are running fine.

Wrong. I paid MK £65. They told me the Gledhill Boilermate II is fine and it was the fan in the Potteron Suprima but they don't repair boilers. Fan changed by local plumber and no difference as far as I can tell. I also never said I was ripped off, you wrote that. All I have said is a part...

Paul, I'm not having a go at my plumber, I think his work is fine. I suppose I'm having a go a my own judgement. Just frustrating that I've spent £300 and yes I have a new fan and the Gledhill has been checked but its just still so noisy!

Its option to take the lot out as the boiler is pushing 12 years old, so perhaps its time. If so what do you guys suggest. Its a 4 bed detached house 13 rads and a Boilermate 2 and I'd like to be a quiet as possible as our room is above the boiler!

First company said they only really work on Gledhill's and don't do boilers but were adamant it was the fan.

He said the fan bearings had gone which was part of the noise :roll: