Recent content by Matta691

Perfect thanks I will give that a try

No I haven’t cut it yet. So are you suggesting to cut the section that fixes to the glass say by 1mm indent so that the seal sits closer

Hopefully you can see the gap there between the seal and the chrome profile

That’s almost identical to the one I have installed there. But unfortunately still leaves a gap in between the seal and the chrome profile

Hi all. I’ve recently had to replace the seal for the glass shower screen. However I have tried 2 of these and am struggling to get one that seals well against the chrome profile there always seems to be a small gap in the corner. To make things trickier the gap between the bath and the shower...

Ok, I can probably get away with about a foot apart

I will give that a go! what is the closest you would put the two slip couplers as I don't want to heat up the one next to it

I can't quote get the last bit out unless there is a technique I am not aware of, the pipe is level so there always seems to be some water at the bottom

I have a Yorkshire fitting 22mm that is leaking from one end. I need to take it out and replace. The problem I have is there is absolutely no movement in the pipe so I think I will have to cut it out. It is an extremely tight area which is going to make this fun! If I cut it out as there is no...

Hi all, I need to attach a plywood subfloor to a concrete base. I need to put a moisture barrier down then the plywood. How would you all look to attach the plywood to the concrete?

Hi all, My boiler is a Worcester 28i Junior and the fan switches itself on for no reason. The timer will be off and the hating may have been off for several hours but it does this intermittently throughout the day and night. We have noticed that our electricity bills are higher than normal and...

yes I have seen an adapter but actually getting hold of it seems to be tricky!

great thanks for that video. That clarifies everything for me. I want to utilise boiler modulation with the wiser kit have you got any experience with how to wire that in?

HI all. I have got a Worcester greenstar 28i junior combo boiler. The thermostat currently on there is a worcester digistat. This digistat talks to the boiler via RF. I am looking to get the Drayton Wiser thermostat system but want to check it will be compatible with the boiler. To add...