Recent content by meltedhouse

Multimeter pics posted, the first one is on the off position and the second one is the setting used when testing the L & N. I have never used one of these before so might be a bit of a donut when it comes to this stuff.

Secondary side 00.2. 200ohms is the lowest setting on the multimeter.

Sorry spark123, I have been away for a couple of days working. I have done what you said and am getting a resistance of 002. This is at the 200 ohms setting on the multimeter.

I am obviously not doing something right. I am putting the red and black probes onto the L&N wires of the Transformer and getting readings of -115, -135.

Please excuse my ignorance - the light fitting?

No, these have a molded brown plug on the end which connects to the light tray. I have a multimeter now and dont know what to do with it!! :oops:

You could be talking swahili with that one mate, dont have a clue what you are on about.. I'm off to B & Q...back in a mo.

Connected 2 browns together and to nothing, 2 blacks to N and 2 Greys to L. Nothing Connected 2 browns together and to nothing, 2 blacks to L and 2 Greys to N. Nothing New pics added to album of transformer. I did notice that there is a clear fuse thingy in the transformer where the...

I havent added any wires btw

I will try that and let you know shortly....Thanks again for taking time to help with this.

I have added photos of the switch to the album. I don't have a multimeter but B & Q is 5 mins away if I need to get one. The lightswitch is outside the bathroom. We do also have a pullswitch for the shower (dunno if that helps?) Our Builder/Electrician might have been trying to cut corners...