don't forget the frost stat is not only going to protect the boiler but the rest of the internal services by bringing on the heating. you could consider 2 stage protection, bring the circ pump on first say @ 5 degs, you try freezing moving water :!: then boiler @ 0 degs...... just a thought :D
The reason I susspect the top connection is because I found crap under the 10mm cap I can pass an allen key down the large port (under cap) but if I try the pressure switch connection with a smaller key it does not pass in to the tee. I did use some force , but didnt want to drill in case of...
Driving me mad.....
Have a prob with the dif pressure switch not operating, pump o k diverter valve has been serviced, just wondering .... I found a blockage in the top venturi port (under 10mm cap) is there a non return valve in the final switch connection ? If not any other reason for the...
Garage installation is not ideal so may incur extra costs !!
Private Garages
The installation of appliances within garages is permitted, however some manufacturers may not allow this option as lower ambient temperatures may adversely affect the efficiency of the appliance and its...
thanks all for your comments, but the fact remains I am going to remove my 25 year old back boiler and replace using a band B rated system boiler, not a condenser as my property is exempt under the HE guidelines, does anyone have comments specifically about the original post re high eff...
Sorry wasnt aware you could discarge to cast iorn, that said dont fancy hanging of a ladder trying to connect plastic/cast iorn addaptor
also to boot
my property is a chalet style meaning a high roof apex, plume will affect next door unless a roof kit is used. I personally dont think a...
thanks for the replys ..
but 1: this is an open vented cylinder
2: recvery rates are from sadis tech spec,not mine
3: as stated in the post a condensor is not a viable option as the only placement avail is in loft space and condense drainage not wanted running 2 storeys down the...
This is A high recovery tank
example 120ltr unit with a primary coil load of 11.5 KW has a quoted recov time of only 23 mins (70% of capacity from 15deg to 60degs)
just thinking of installing one instead a conventional cylinder and wondered if anyone had any views/exp :)
Hi all
Just wondering if you have any opinions on Sadia Megalife vented cylinders and their ilk ..got to replace back boiler this year and cant fit condenser due to restrictions Ect, is the initial cost for the unit worth the savings? 3 bed semi , Gas fired inst
I know there is no...