Recent content by mgeragh

I will be installing an Eonon head unit into my Ford Grand C Max at weekend and wondering if anyone has any helpful advice before starting the project. Also would like to use the mic that is already built into the car. is this possible? I have bought a new facia and kit that will keep steering...

Thank You. got the same part from Toolstation today for a couple of quid cheaper fitted and works with no drips! thanks again mate :)

That's great thanks for your reply!

https://1drv.ms/u/s!ApgnblIX2YtqrEdK1kRwHcywCZ7X

Hi hopefully a quick one. My gutter is dripping where it connects to my neighbours. is it a simple case of buying a square to round connector? Thanks in advance

Hello when i moved into this house, the bathroom was cladded and painted in an awful blue colour. It was repainted with grey emulsion which never dried and simply wiped away. I since painted with a kitchen and bathroom paint which has mostly lasted however has chips where the blue is showing...

Of course!! That makes perfect sense.. Thank you very much!!

Thank you for your reply. I have attached to the Red and White and powered up fine. In terms of separate switch this is via means of an inline LED Controller. However, I connected the LED controller inline, and whenever I press any key it blinks but does not dim, or power off etc. I have...

Thanks for your response. The existing light is 12v it runs off the caravan battery. The strip light is also 12v and does not require a driver. Many Thanks

Hello I am looking to extend an LED strip light with controller off the existing Caravan wiring. This is the closest light, where do I splice to extend red and black wires? Thanks Mark20160325_134608 by mgeragh posted 25 Mar 2016 at 2:22 PM

Caravan

why are the screwdrivers advised against? The reason i think it was the swich is last time i replaced a bulb (a while ago) the light had turned around so a cable inside had came loose. I put the cables back in however it was always on, so took the bulb out and now trying to replace it...

I can get above thats no problem. I can test if live but didnt fancy it at gone midnight last night. Dont think I removed anything else, assumed it may be the switch? As when i used it last it was always on!

Could this then be just a case of dragging it over from under floofboards. I am not sure if it is live or indeed what it is for! Thanks