Sorry I should have made it clearer but that's the road (not my driveway) next to the front of my house. The area gets quite muddy in the winter but thinking about it don't think I'll bother with stepping stones & will just keep it simple with some decorative stones/gravel.
Ok, don't think cementing would be really necessary then. I've read so many 'guides' on how to do this process I think I've royally confused myself but think if I keep it simple it should be ok!
Basically I'm fed up of stepping out the car onto muddy grass hence why I thought replacing this...
Many thanks for your advice. Would you recommend cementing the stepping stones in place so they are solid with minimal chance of them shifting?
I'd be looking to place 3 or 4 in the section of grass as per the picture.
Also regarding the 2 service plates, I assume digging up the grass/soil...
I want to try and attempt to create a simple gravel path by removing the grass area adjacent to the road as per the picture.
As a relative casual DIY'er, is there anything specific I should be aware of being next to the road? Would I need a border or is this not really necessary?
Was thinking of...
Hi, a section of block paving by the side of my property adjacent to the grass has started not allowing rain water to penetrate through as per the pictures. It simply sits on the surface in the area as shown.
This was never an issue until I removed some weeds/mud from this patch. Would this be...
Hi, I would like to paint my patio as can't afford a new one at the moment.
The current slabs are hard wearing & not very aesthetic. They are Bradstone Peak Riven Buff paving slabs.
Would these come out well painted with something like Resincoat Patio paint?
I would assume I'd need to jet...
Hi, I recently painted my garden fence but some paint has been accidentally sprayed on the concrete below it as per the picture.
I've tried jet washing it off and using white spirit but had no luck with either.
Any suggestions welcome.
Many Thanks
Thank you for the replies. Unfortunately I don't think the plastic parts are relevant to the issue after looking into it more.
Essentially, the window won't close properly / securely when the handled is turned - you can just push it open. It's not 'latching' at all..
I've uploaded a video...
Hi,
I'm having an issue closing a window properly and on closer inspection it appears two pieces of plastic that go either side (apologises I have no idea what these are called!) are missing.
These are present on my other windows and enable the window to be pulled in & close and lock.
Would...
Thanks for your insight. Very good tips, especially the one regarding using builders adhesive when setting the plugs. Will give that a try.
I've just purchased a couple of 1m long rails so once they turn up will give it a go! Many thanks
Ok great, thanks that makes sense.
I've been reading about possibly getting specialist plugs specifically designed for thermalite but in your opinion do you think normal brown plugs will suffice?
Assume a 50mm length screw would be ok for this too..
Ok, I have a few of these brackets as below. Do you think they will suitable/strong enough to hang the cupboard?
The wall I wish to attach to is actually thermalite I believe. Any recommendations on screw length and corresponding wall fixing would be appreciated. Thank you.
Ok great that's very helpful. Would you recommend one longer rail for added strength or are smaller ones ok?
Assume the fixings already on the cupboard simply fix onto these? Sorry if it's stating the obvious!
Much appreciated.