Recent content by mike2020

  1. M

    chimney help needed

    hi, just wonder if i could get some advice got a knock on the door a few weeks ago from the next door neighbour (we live in a old terrace house) they have a damp patch on their bedroom wall where it joins the ceiling. she got a roofing guy out to give her a quote but he refused to go up...
  2. M

    Mira sprint 9.5kw no power

    Hi, we have a mira sprint 9.5 kw electric shower which is over 2 years old and has been working fine, until yesterday when i turned it on and nothing happened, no power light came on and no water came out. The power light comes on on the pull switch, i've also had a look in side the pull...
  3. M

    slow fan condensation build up

    i think i sussed it out theres 2 small rubber tubes in the top left section that connect to the fan, i disconnected the orange one and a bit of water came out then it started working again, this makes sense with what the engineer said "the fan is slightly slow which causes condensation...
  4. M

    slow fan condensation build up

    I had a problem 6 days ago with my worcester 28i junior we got an engineer out and he said that the fan is a bit slow and because of the cold weather its causing condensation build up in a pipe , which just needs to be emptyed in order for the boiler to work again, sort of a quick fix...
  5. M

    worcestor junior 28i problem again

    thanks for the reply, ive already had that problem earlier in the year, i just bypassed the part by moving the conections on the part anyone got any other ideas what it could be
  6. M

    worcestor junior 28i problem again

    hey guys dont know if you remember me, i had a faulty pcb back in september got an engineer out and he replaced it which cost £200 parts and labour well im having problems again, my other half tried to use the hot water this morning (the heating had been on for an hour) and after a...
  7. M

    worcester junior 28i problem

    just to let you know it was the pcb, had an heating engineer out to replace it, its working fine now
  8. M

    worcester junior 28i problem

    pcb, is that the circuit board? how much do they cost/ fix?
  9. M

    worcester junior 28i problem

    Hi tony thanks for the quick reply I did repressurise the system but only to 1.0 which i thought was the correct pressure, ive now topped it up to 1.5 will test it shortly and let you know, if it is the CH temperature sensor how much will it cost to fix replace this?
  10. M

    worcester junior 28i problem

    hey guys, about 5 months ago i was having a problem with my presure valve which i bypassed and all was fine, so I haven't used the central heating at all over summer but hot water has been fine, then last week I started using the heating and I get a fast flashing light after about 20...
Back
Top