Recent content by Mike366

  1. M

    Baxi 105e Instant diverter valve?

    Thanks for the replies - I'll call them in. Been an expensive month as 3 weeks ago I put a new circuit board in to fix the "fan or flue" problem. Thanks again Mike
  2. M

    Baxi 105e Instant diverter valve?

    I need to get someone in to fix this - the spring clip snapped off so the valve head is now stuck in place. Any recommendations for a good fitter in the L39 area? Mike
  3. M

    Baxi 105e Instant diverter valve?

    Thanks Tony I need to get some dismantling fluid as the retaining spring clip is rusted in so I can't get the head off - maybe what's stopped the valve moving. Mike
  4. M

    Baxi 105e Instant diverter valve?

    Hi my Baxi 105e instant is only delivering slightly warm water. also with DWH preheat switched on, the radiators warm up. I fond them all hot at 3am! When a hot tap is switched on the boiler ignites, the DWH neon comes on and stays on until the tap is turned off, so I'm guessing the...
  5. M

    Problem tightening kitchen mixer

    If a box spanner wont do the job try a crows foot spanner. Good luck Mike
  6. M

    old bath, new taps

    You could try asking a a local metal fabricators to make up plates bespoke for you. I've done this a few times for oddments. Cost £15 ish for a metal worker to run something up in his lunch hour. Draw out what you want and be very specific about dimensions, including thickness of the material...
  7. M

    Baxi 105e Two problems – any ideas please?

    I've looked up HEATEAM on the web and will give them a call. Thanks Mike
  8. M

    Baxi 105e Two problems – any ideas please?

    Reference to corgi reg was because I think the boiler will need to come off the wall to get at the expansion vessel - it's pretty tight working on it in situ. I'll check snapon for better quality valve extraction tools. We actually have two of these boilers. One has given no trouble ever, the...
  9. M

    Baxi 105e Two problems – any ideas please?

    Problem 1 – the Schrader valve on the expansion tank leaks so the system depressurises. I tried to re-tighten/replace the valve core but it wouldn’t move. I’ve put a temporary fix in by attching an extension motorcycle Schrader valve onto the original (similar to...
Back
Top