Recent content by modemfish

"the fascia fitters should have notified BT that they were removing the cable and re-attaching it to the new plastic fascia" Hi roofline thanks for the reply We do not know when the attaching to the fascia was done, or by who. This was prior to purchase. :-( I'm still trying to understand...

Hi, I recently had the gutters cleaned and some repairs to the gutters. The contractor pointed out an issue with the facial panel. ? (sorry don't know the correct term) but see red circle. it is gaping. The contractor reckoned it was an issue with the placing and tension of the telephone line...

Thanks but I would like to be able to tell the installer how to exactly fix the issue vs there being any extra delay or an attempt at an extra fee for troubleshooting.

Thanks but as stated if I remove the batteries from the old Thermostat then we get no ch ( ch and wireless icons flash) so how does one disable the old Thermostat such that ch is still enabled for the nest to control?

8

Yes sadly looks like the pressure is still falling albeit much slower. Looks like I'm calling Worcester again tomorrow.

We had the nest installed but the ch wouldn't come on. Ch and wireless icons continuously flashing on the panel. So I put batteries back into the old Thermostat and heypresto the ch came back on. Also nest is also working. But I'm not sure both thermostats should be active.? If you agree what...

Yep still under warranty and Worcester sent engineer over today. Same day as called. Leak was something to do with expansion vessel. Done at no cost so very happy. More importantly not due to a leak in the ch as had new flooring put everywhere. Engineer did write up for not having brackets on...

So now I'm unsure whether I need to call in the electrician who fitted the nest, or call a Worcester engineer, or both. Boiler is 2 years old so hopefully under warranty (not sure if previous owner registered it thou) Thanks for the responses so far much appreciated.

Thank you. Would a faulty Diverter valve also account for the pressure loss? Or is there another problem?

Hi just moved in and the boiler has been off for some time. Had some new rads installed. Boiler has also now been connected to a Nest. Rads were also bled. Boiler is providing the hw fine but no ch. Also the pressure is dropping to 0 after about 4-6 hours after pressurising system to 1.5 bar...