Recent content by nagged

Thanks again, they are 147 I think. I'll get planning proper this weekend. :)

Oh, and sorry - thanks again for the reply.

I am only tiling one tile above the border, aside from the shower end and part of the bath wall which will be up to the ceiling. I was gonna work out my bottoms and tops for cuts - I want to avoid any slithers if possible. I have 15cm x 15cm tiles and the adhesive I have is from nicobond...

Thank you for the reply. I was looking to work out from the window and use either a grout line on the centre or the centre of a tile to work out from - depending on what gives the best corners. It was a bit of a coincidence that the window sill and bath top could run on full tiles. It...

Hi All, Forgive me in advance for my info-graphic pedantry. I would like to get this right - so I am preparing. ;) As per image above, the bathroom is quite compact (1.8m x 2m) and the basin and toilet are on this window wall as is the bath end (when the bath goes in). The new bath...

Thanks again for all the replies. Managed to get it orf, though I had to be careful to pack around the valve one side to stop movement as it was on so tight. Worked out how to re-pressurise the system and bled the other rads. Will give this rad a rinse through with the hose. So all...

Thanks again John and Armo74 Really helpful. There is no tank, it's a new Combi system. We only had gas piped in to the property in March. I know there are some vent things in the loft - not sure what they do. The guys did explain but it's all a blur. So I have to work out what the feed...

Cheer John, Appreciated. At least she'll stop nagging me now I can get that wall sorted without her having to sit in her coat for a few days :p I'm a bit wary about the putting it back on though. I guess you just do the reverse - that much I get. But the other steps with the inhibitor etc...

Thanks for the replies -really appreciated. I think it is just basic valves the other rooms have thermostatic ones - but these are smaller: I guess this means we are good to go? Is that a drain tube on the right?

rads

Hi All, Long time lurker first time poster. I am renovating our bathroom and we have a small radiator on a tiled wall. I was hoping the tiles would pop off cleanly - they ain't. Long story short, I am going to need to bond and skim this wall before tiling. The radiator needs to be off...