Recent content by Neil Henry

LEDs are fine. Wired the cable to a plug and plugged it in. They work fine. So I am not sure why when I wire them to the switch they are causing the kitchen lights to flash and the deck lights to flash like a strobe effect. Anyone any ideas ?

I tried it, and when I switched it on, the lights kept pulsing on and off. Any ideas to what I was doing wrong ?

No. I thought those were transformers in the picture. I will edit the original. The power cable runs up into the loft and has been cut, so I cannot see where it originally went to, to get 240v as their is no way it would be drawing power from the twin light switch as it doesn't have enough power.

My solution. BIN... Windows 10. I have had nothing but constant issues with it, the latest being since the last update, it no longer sees my DVD burner and one of my USB hard drives. Yes, it works fine on windows 7 and my Ubuntu, so it's a 100% windows 10 issue. Linux built the house. Microsoft...

Who is your ISP who provides the email ? Chances are you have not got the settings correctly as a few of them require specific ways of connecting to their email servers.

Well considering I know the person, I believe her. She said decking was working before they put new soffits in, then she found out later on that they had disconnected them.

Hope this helps.

Hi, Quick question. I moved into a house that has deck lights which are powered by 240v plugs which are plugged into a 4 way gang socket. (4 of them in a junction box) which runs to a cable which goes into the roof running up the wall. They used to be powered by one of the switches in the...

This might seem obvious, but have you tried the auto button on the monitor ? That usually resizes the screen.

Have you tried right clicking on the .exe file and the selecting properties then the compatability tab and click on Windows Xp SP3 Hopefully that does the trick.

I too would love to see proof that after running dban, your data Is still recoverable. I have seen reference to recoverit, but there have not been many good reports on this software. Maybe by a large corporation with no limits could do this, but that would be down to other factors like...

I Turned the cold water off at the main valve. Turned the heating off and then switched hot and cold taps on to drain the system to replace the taps.

Yes I have. Makes a load of banging and then goes back to red after about 2 mins.

Morning guys, How would I rectify this. Installed a new bathroom sink yesterday, turned water off and drained it, but when switching the heating back on it sounded like someone was kicking the pipes (air most likely) The red light flashes on the boiler and won't go off. The boiler is a Baxi 18HE

Looks like a faulty psu. Pop it into the local repair shop Very unlikely that the mobo is fried, as most pc issues are down to psu, gfx card or ram.