Recent content by nellymc

Hi All My doors have now been in for nearly 2 years. This summer i have noticed our opening door is catching at the top and making it a bit more difficult to close. Any ideas on how to lift the bottom and top. It may be running out from door 2. Photos of hinges etc

Hi all. At ease! Spoke with the original builder and he has pointed me in the direction of the local sawmill he uses.

Thanks Andy. I might be picky but I was looking for 95x95 to match what I have and to fit in the same area

Evening all. I have a raised bed that needs replacing as the wasps managed to bore into the wood and its now falling to pieces. This replacement is to match other raised beds in the garden. They are constructed from fence posts 95mm x 95mm. These posts were supplied treated in brown when they...

New update. After replacing the suspension legs it was still knocking. It was eventually found that the large nut at the back of the drum at the rear pulley was a bit slack.

Fyi. It's needing new suspension legs.

Thanks all. Decided I don't have the time to go a searching so got someone coming to look at it for me. Everything pointed to quite a big job...

Thanks. Nothing when I spin by hand. Might take the top off to see if therebis anything loose inside. I have tried lifting the drum to see if it might be the bearings but it doesn't seem to have much play. It does go back and forth quite easily though.

Hi all I have a Samsung WW90T936DSX washing machine. Recently it has started making a knocking noise during its spin cycle. It sounds like some plastic being hit off something and coming through the drum. I have a small video of it but don't know how to upload here. Any thoughts? Thanks