Recent content by nick barton

F..............k you then!!!!!!!!!!!!!!

I am pricing up to emulsion a 4-Bed New build property which will require 3-coats to both ceiling and walls. Can anybody estimate roughly how many litres for walls and litres per ceilling I will need ? Thanks

I am having problems keeping my Emulsion Paint Rollers(9") from slipping off the frame. I use quality trade gear and have tried binding insulation tape around the ends to tighten things up......But they still slip !!! Any Help please would be appreciated Thanks

When my Central Heating Boiler is working (Ideal Classic NF230) it is occasionally being interupted by a series of RAPID clicking from I THINK the GAS CONTROL VALVE. The interupting bursts of clicking send the gas flames on and off !! Am I to believe this is a sign of the VALVE Packing up ...

Yes I fitted (replaced )the motorized valve and actuator together and the B-port runs up to the clylinder as instructed .

After dealing with an AIR block in the C/H system a few weeks ago I am rapidly getting HOT tap water even when this demand is all CLOSED off. 1. water stat set to zero 2. programmer turned to off This is of course only happening when the demand for C/H is in operation. In an attempt to...

Chris I am positioning the stat dial to zero and am still getting the(click off) temp up to 65 deg!....listening to the valve opening and closing at this point seems all normal. Could there be an INTERMITANT problem with the electric zone valve box with it occasionally NOT opening and closing...

It is a 3 port valve on h/w

Yes - this is closing after stat clicks off. Water temperature still creeping up higher than setting. Does adjustments screw inside stat make any difference? Although this had not been touched previously? Any thoughts???? Thanks

Following the replacement of a gate valve next to pump and draining off the system (this all worked well) and all back as normal....But however i cannot control the amount of HOT WATER as the cylinder thermostat has no affect on the temp. (set to 45 deg...getting up to 75 deg heat ) I have...