hi all
I purchased a netatmo smart thermostat as replacement to my existing dumb wireless stat.
I thought it would be a straight swap but not so sure now. The old stat has live, neutral and switched live. The netatmo has 4 wires in the ‘boiler adapter’ and I’m not sure how to connect it.
In...
hi all,
quick update. Nest is now purchased and installed - thanks for all your advice. It took quite a while to get it all wired up and ensure everything connected where it was supposed to. Whilst I could have rewired everything to ensure consistent use of colours etc (per freddo) this would...
thanks Andrew - very helpful. Like you say, I may as well bite the bullet and swap out both the programmer and the wireless stat/receiver for the 3rd gen. bit more effort in cabling/wiring but better in the long run (assuming I dont c**k it up). So just to confirm,the red link between the #3...
now got a clear-ish image of the wiring centre. As you can see its a bit of a mess so I didnt want to meddle with it but I can if necessary ! Seems like the sparky (or plumber?) used any old 4 core cable he could find hence the use of earth cable for live feeds !
The Salus cable is white...
thanks Andrew - I havent bought anything yet so Ill go with the Gen 2 in that case !
However, Im reasonably confident that the green cable is not earth in this setup from what I recall of the wiring centre. As it is now suggests something remains powered even when no call for heat ?
I dont really have an issue with the HW control currently so happy to leave that on the old programmer.
... the following image is from the Nest manual:
Looks like I would attach:
brown = 240v L => Nest L
black = 240v N => Nest N
green = SL (off) => Nest 1 (Satisfied)
grey = SL (on) =>...
hi all,
Id like to do a self install of a 3rd gen Nest thermostat.
Currently have a programmer for independent HW and Heating. The temperature in the main house is set by a Salus wireless thermostat which is too dumb for my liking. We also have an extension which has UF heating (mixer/pump and...