Recent content by nitro23456

How about a mixer bar if it is to shower the dog

Thank you. Will check again in Spring

Hi all Getting boxes down to put away Xmas Dec's and used my Schneider Moisture Meter on the roof timbers. Most measuring 16% with the occasional 18% Is this something to worry about? Doesn't smell particularly damp up there.

Do you have an external pressure vessel?

Your existing new washer and ptfe tape on the threads.

Basin waste probably runs under the floor to the same location and leaking at join there. Tiles hopefully won't need to come up as can cut into that boxing in next to the toilet.

Depends on how waste from basin is routed. Take some photos upstairs.

Looks like that is waste/soil stack related. Possibly a join to the main stack but impossible to tell with the info given. Can't answer access question as no idea what access there is upstairs. Potentially access under bath assuming it's in that position. It looks like an internal stack that...

Hi all I want to add another socket in my living room. Easiest route would be to drill through existing backbox to outside, then some form of suitable conduit before coming back inside. What would you recommend to house the cable on the outside wall? Was looking at Tower 25mm conduit and...

Doesn't look any worse than the lousy sealant job around the base.

Good job they weren't anal with something else or you might not be a grandparent.

Turned?

Are you a plumber? Even I've got lengths of 32 and 40 in the garage. Might be worth keeping some of each in the van.

Where did I say they do?

Undo the nut, clean up the surfaces, roll a sausage ring of plumbers mate so it sits around the top above the threads and onto the top thread, do nut back up so it displaces the excess plumbers mate, peel off excess and put back in tub, job done.