Recent content by nobbynomates

Wow, That escalated a little! So its safe, although not done quite correctly, it needs the lighting circuit down fusing with an FCU and 3a fuse? Am i better off replacing the 16a RCD with a 32a? Am i within the rules to do this work myself?

Just out of interest, how have you come to the conclusion that it is a ring final circuit, did you start with end to end continuity tests of all conductors, then r1+r2 tests? PrenticeboyofDerry, Visually, i can see the whole cable run. And did you think about why someone would install a ring...

Thanks all, PrenticeboyofDerry, it`s definately a ring final circuit. So whats the best way of improving/making good? How do you down-fuse the cables, load side of lighting?

Recently moved into a "new to us" house, have a question about the wiring in the garage. The garage is built onto the side of the house, it has its own dedicated ring final, which has 3 double sockets, however, it also has 2 junction boxes in the ring final that supplies power to the 2 strip...

Thanks all. Floor is concrete, so thats a no go. Looks like my best option is up from the socket, around the top and down. At least i can get on with bricking up the fireplace.

I want to add a socket to the ring main in our front room, however, i have a socket on one side of the fireplace, question is, does the horizontal safe zone extend around the fireplace (which sticks out from the main wall) to the other side? I`m having the fireplace bricked up, so before i...

We have a Baxi Combi boiler, when the hot tap is turned on, the radiators are heating up at the same time. Switching it to taps only, makes no difference. Any ideas before i call someone out?

So 2.5mm T&E it is then. No lagging, just a straight run through joists. Thanks all for your help. :D

Sorry for the confusion. :oops: So is 4mm or 6mm direct to 16Amp mcb acceptable in this instance?

Sorry mate, read my 2nd post again, i edited as you posted.

Let me try to be a little clearer. I`m rewiring the kitchen as i still have the old original wiring, the black rubber coated type. At present, the single socket is fed by one single cable, direct to old CU. The cable runs through joists, (through holes) in a flat roof above the kitchen...

The LABC man is due to pay a visit next week before i start any work, everythings sorted apart from plans for kitchen wiring. I need to swap a single socket for a double socket to power a combi boiler and the washing machine. Thing is, the old wiring is a radial circuit, and running 2 x 2.5mm...

Local Authority Building Control services.

Thanks Chaps. :D

You mean the Wylex isolator switch will fit in the Wylex RCD housing?