Seems to be, bit disconcerting as to what caused it and how it fixed itself. Will have to give it few hours and decide whether to get it checked. Always the way when you want to show what's wrong it all works smoothly!! Thanks for your help. Fingers crossed I don't need to post again.
Sorry for continued updates. Just to clarify when I turn the heating on, the lever on the vertical black box in the photo moves from the auto position to the manual position by itself . if I then turn the thermostat down (with the heating timer still on) it moves from manual back to auto. Is...
This morning everything seems to be working. Thermostat and controller, control the boiler, I did get an error message on the boiler once though.
"E24
Return exceed flow temperature by 10C - check direction of water circulation and operation of flow and return thermistors."
turning the...
Here are the pictures. The one that is vertical is on 'man open'. The horizontal one is on 'auto'. I have no idea what each one is connected to.
Second photo shows both valves one behind the tank and one vertical.
I can't find the valves exactly as you have in your pictures but there are 2 black boxes with the words danfoss motorised valve. One has a switch in 'manual open' position the other has it in 'auto'.
Hope somebody can help.
Keston Q28H boiler
Drayton LP241 controller
Honeywell thermostat.
I have turned the heating off at the control and turned the thermostat to 0, but my boiler still indicates heating is being called for and is running it at max temp. Any advice?
Landlord installed a "new" dishwasher beko 4310w, on the inside top surface (silver part) there are huge rust coloured stains (cross between rust and tomato sauce!!). What is it? Is it dangerous? rest of the machine looks new so can't see a reason for the stains, quite extensive. My first use of...