Recent content by nopatience

Wow than you kind sir I thought I was going to have to wait days for a reply from someone. I have already marked all wireing and noted on paper also as I have been there before with car wiring looms, would you recommend fusing the temp feed or would the bell box already be fused internally...

Thanks for your quick reply Excuse the tie wrap it’s holding the cover trigger switch in

Hi hoping someone can help, I’m looking to relocate my house alarm panel but don’t want to go to the trouble of borrowing ladders to get up to the sounder box, I was wondering if it is possible to temporary connect a 12v power adapter to the following wires to stop the siren sounding while I do...

No mate only illegal if I do Gas pipe-work and connect the boiler to the flue, all I've done on that side is core hole out for flue put the hanging bracket and pipework jig on wall push the flue through hole, run pipework from boiler jig excluding Gas and the rest will be up to him the boiler...

No worries in the extras department Because I built him a conservatory last year Mates rates :D all I'm doing is flue, hanging the boiler Jig and running the new pipe work from the loft to connect up to the old 22mm manifold feeds, hence needing to know which is which so I can run them the...

A bit sad I know but I've done a quick diagram, after ripping a bit of floor and ceiling up and doing a bit of investigation work to get it clear in my mind :oops: can you tell from this diagram what pipe used to be the flow and return? is the 15mm pipe that is tee'd off the 22mm which...

petit-pablo, just checked and the pipes go into the heat exchanger it the same level but thanks for the quick reply. namsag, I think the boiler must be about 15 to 20 years old I have been looking on the net to see if there was any installations manuals for it to no avail, what are the two...

I'm trying to find out which pipe is the flow and which is the return on a Myson Economist WM25/40 the hot water cylinder, pump, tanks etc have been removed, all I'm left with is the boiler and the two 22mm pipes coming out from the ceiling into the top of the boiler, so how can I tell which is...