Recent content by nothing is simple

My Makita drill/driver is faulty. The motor turns fine. The chuck does not when in low speed forward gear. It turns in every other speed and direction. When I hold the chuck it sounds as though the clutch is slipping or the gears are not engaging. Help!

Thanks for your help

Done that. Got the tank filled. Tiger loop has a lot more oil in it. Bled the oil pump. will not ignite. Checked for oil going to nozzle. None. Blew it through. Still nothing. Checked solenoid. 16 volt feed. Solenoid is not attracting anything metal.

Does that mean then there is either a blockage in the oil line or there is not enough head of fuel in the tank. There is about twelve inches on a dipped rod.

My heatslave 15/19 was locked out yesterday. There was no fuel in the loop. I have oil in the tank. the cut out button on the fuel line had not activated. I thought that maybe the pipe from the tank to the loop had muck in it as the level of oil was fairly low so I disconnected the pipe and blew...