Recent content by nskeates

thanks for the help, it turned out to be the motor start capacitor. :)

Thanks, Where roughly can these parts be located. thanks neil

thanks for the reply. model number is Product Number Code:911841111 ESL6114. will try the arms but would have thought it strange for both arms to be blocked at the same time. i think the red/brown stuff is all to do with the water softening system (i think) thanks neil

Hello, I have got the electrolux dishwasher that has started to play up. Its about 5 years old and used daily. When i put it on a cycle to wash the water will drain ok but i get no water spraying from the rotating arms at all. I have checked the feed and thats ok, i took the left hand...

Hello, I have got a Hotpoint WT640 which is just over a year old and it has started making a knocking noise when its on fast spin. works perfectly fine apart from the noise. Outer shell is not knocking against anything and all legs are down and stable. has anybody got any idea of what...

can somebody tell me with this boiler if you switch the little lever to the '0' position should the boiler go off and have a '0' in the display or still have the 't' or 'c' in the display but not fire up ? thanks

hello, I have the british gas boiler cover and over xmas had trouble with my boiler turning off and not turning back on. Currently british gas have been out 4 times and even tho the boiler is running its not running properly. they have changed the ecu board and the front control panel so far...

now not sure if they are in the correct position as there is 2 parts to the fitting instructions and it all depends on the part number of the board which i cannot see until i take it off.

just checked the jumpers on the pcb and they are in the wrong position but reluctant to turn boiler off again to change the position of jumpers just incase cannot get it fired up again. are there any issues with running boiler as is until it goes off again and then changing positions of...

thanks for the reply. the original problem was that i could only run the boiler on constant, as soon as i switched it over to the timer to come on or off it would just not fire up and would have the 0 on the display. i currently have the system working, not sure how but i turned all the...

Please help, my boiler has been working on and off since monday, British gas have been out 3 times to it but still have not fixed it and have a feeling they are just replacing bit by bit until they come across something. My symptons are :- Boiler will not just fire up, has a 0 flashing on...

Hello, I have just had a new boiler Vallant EcoTech Plus 831 fitted as well as a new bathroom, all is great apart from the basin taps seem very noisey. The tap is a Bristan Capri Basin mixer. The inners have been changed by the fitter as he agreed the tap is noisey. Run the bath tap and no...

Hello, just had a new kitchen fitted and the fitter has only put a very small bead of silicon sealant around the worktop, i was wondering if i could go over this with more silicon sealant without having to remove the first bead ? thanks

Hello, just had a new kitchen fitted and the fitter has only put a very small bead of silicon sealant around the worktop, i was wondering if i could go over this with more silicon sealant without having to remove the first bead ? thanks

Hello, i have just tiled a new en-suite and want to put sealant around the shower tray. could anybody with some experience please tell me what the best brand of sealant is to use. thanks neil