Recent content by OakLover

  1. O

    Oak Veneer OR painted semi-solid internal doors?

    I Osmo'd an oak veneer door at my previous house on the advice of UK Oak Doors, but Travis, Wickes, Howdens, all warn not to apply oil or wax as the veneer will delaminate. One other issue is that if you cut through to the core (I did, thanks to misleading trim info) the thin oak veneer gives a...
  2. O

    Pyronix Cloud Costs

    @secureiam - if I self install Pyronix Enforcer, is your 2nd year on discounted cloud fee likely to be available at that point? If so, and I subscribe, do you grab my cloud access control or do I still have it? E.g. I wish to add a user - do I have to come through you to do this? Many thanks.
  3. O

    HKC vs Orisec alarms

    With the alarm unset, it just went off when I opened the garage door! It's going back!
  4. O

    HKC vs Orisec alarms

    The live bell box is on the side of the house. Installer said it was better to be closer to the panel here, plus there was an existing live from the previous box in the same location. On the front of the garage is a dummy box. The live box is about the same distance from me in the drive with...
  5. O

    New oil combi recommendations

    Our heating engineer of 15 years recommended Grant over WB. Vortex Pro fine. The blue just meets future requirements but no real advantage and more pricey. We found the VTXCOMBI36 36kw for about £2,200 inc. VAT by opening an account at out local plumbers merchants. He installed a WB 14 yrs ago...
  6. O

    HKC vs Orisec alarms

    I had it installed by a local alarm company. I've told them to uninstall it. Our sparky also supplies alarms and will advise on an alternative Monday. External bell is mains wired but wireless signal. I'm aware of extender - spoke to Orisec's tech manager Paul yesterday. He was fine, but said...
  7. O

    HKC vs Orisec alarms

    I had an Orisec installed last week. Panel is W-CP-40K. Not happy. External siren is pathetic. Wouldn't scare a mouse. Remote fob won't disarm the system from the drive, so I think I've switched it off, open the garage, then the garage PIR sets off the alarm. Every time. Paul at Orisec can't...
  8. O

    Laying 10mm T&G engineered oak over warped pine boards?

    :? Downstairs I have laid 20mm unfinished solid oak T&G over 20mm lightly warped floorboards in the lounge using a secret nailer, and the same in the dining room but had to float and edge glue 75% in here due to the extension's concrete floor. Did these rooms 5 years ago with Osmo finish...
Back
Top