oilhead's latest activity

  • O
    oilhead replied to the thread firebird heatpac.
    If the Alpha refers to a pump fitted to a Grundfos pump with the same model markings, then yes. What does your 'local shop' assistant...
  • O
    oilhead replied to the thread Reillo rdb 2.2 lockout immediately.
    Have you checked the solenoid coil? Have you checked the motor for jammimg, both with the pump fitted and the pump removed?
  • O
    oilhead replied to the thread firebird heatpac.
    Is the boiler hot? If so, it could well be the pump.
  • O
    oilhead replied to the thread Heating but no DHW.
    Latching the valve will let water pass, but as far as the controls are concerned, the HW will not be on because the switch in the valve...
  • O
    oilhead replied to the thread Best grant vortex oil boiler for small 5 radiator bungalow?.
    Heating oil already has an element of biofuel in it. The boiler will be set up for 28 sec heating oil, no conversions will be necessary.
  • O
    oilhead replied to the thread Immersion hot water not lasting long enough!.
    If you turn on the boost dial does the hor water come on. It looks as though it gives you an hour, or part of an hour depending on how...
  • O
    oilhead replied to the thread Best grant vortex oil boiler for small 5 radiator bungalow?.
    What regulations will decide whether or not you can fit doubles? What is the Kw heating load you need? Once this is established, you...
  • O
    oilhead replied to the thread Riello Pump ID.
    If you disregard the advice of an experienced engineer who did the donkey work for you, and wish to rely on the advice of a parts sales...
  • O
    oilhead replied to the thread Riello Pump ID.
    Evertbody on oil is using Bio fuels. It is the industry standard. 'cribbing' is moaning or arguing about a situation. As I said, you...
  • O
    oilhead replied to the thread Riello Pump ID.
    Whilst it is 'only an O ring', for the cost of the manufacturer's part, why are you cribbing? It is essential that whatever you use...
  • O
    oilhead replied to the thread Automatic Air Vents.
    As they are at the highest point, it will be worth keeping them as vents, , but I would replace them with manual vents. You may find...
  • O
    oilhead replied to the thread Riello Pump ID.
    Which O ring do you want? If the one for the oil filter cover, I think you will find there is only one over the domestic ranges. Ifyou...
  • O
    oilhead replied to the thread Grant Vortex Boilerhouse 15-26 kW Boiler.
    Can you elaborate on why you are asking this question. The temperatures you are specifying are typical of the operating temperatures on...
Show older items
Back
Top