Hi All,
I installed a new 3 way switch and intially had it working on all 3 switches after just doing a switch by switch cross over of the cables. I then snapped a screw in the backing box which meant draggging all the wires out. Although I tried to group them I have been unable to rewire...
Solved - that was exactly it that neutral is a switch live. Thanks for the help. The only other caveat in case anyone Is in a similar position to me is that the wiring on my hive required the heating to be connected to the boilers (switch?) live as opposed to the hot water as I have seen with...
Hi,
Thanks for the reply it does seem that the thermostat is the issue then as the hive wiring seems correct. It seems there is only one live cable although obviously I can’t be sure as you mentioned the neutral is actually a neutral but the live is definitely live. I have attached a photo of my...
Whether it’s relevant or not I’m unsure but this cable where the thermostat was is still live. Image by OwainOW posted 28 Feb 2022 at 9:50 PM
As I mentioned we had an old thermostat here which didn’t seem to actually do anything until we took it off and now the heating won’t work. Would it...
Hi all,
Sorry to add another thread but I’m looking for some help. I have installed a hive v3 water and heating replacing my old st699. This was prompted by removing the old thermostat that I thought wasnt working and doing nothing to find it was infact setting the heat of the house and plunged...