Recent content by ParisPark

  1. P

    Adding branch to existing stack

    Will this slide in to a standard 110mm pipe? http://www.wickes.co.uk/Wickes-110mm-Grey-Soil-Pipe-Universal-Connector/p/114585
  2. P

    Adding branch to existing stack

    Interesting! Thanks, I will see how deep the pipe goes when I get it open, hopefully it is about the minimum distance.
  3. P

    Adding branch to existing stack

    Thanks for the heads up. I'll give them a call. They are still due to come sign it all off anyway so can get them to check at the same time. :)
  4. P

    Adding branch to existing stack

    I don't have a pro, but would call one in if I didn't feel up to the job.
  5. P

    Adding branch to existing stack

    Perfect. Thanks a lot. I'm quite confident I can attack this job now.
  6. P

    Adding branch to existing stack

    Thanks again. At least then I have a backup plan if they don't come apart. Would this be used to slide in to the existing pipe if I need to cut below the access plate?
  7. P

    Adding branch to existing stack

    Thanks for the reply. Would the attached fitting slide inside a standard 110mm pipe, i.e. act as the male end? I can see there is a female join right at the concrete level, but I'm concerned this will not come apart cleanly so I'll need to have a backup in place before I break the pipe.
  8. P

    Adding branch to existing stack

    Hi, I am looking for a bit of advice before I call a pro in. I need to insert a tee branch into our existing soil stack, for a downstairs loo. My problem is there doesn't appear to be enough clearance above ground level for a coupler to slip on top of the pipe that protrudes from the concrete...
Back
Top