Recent content by pato1122

hi dave the company that fit my radiators set the pressure at 1.5 cold and told me to keep it at that but when rads are on it rises to aprox 2.8-2.9 is this not right then? do you think i should drop pressure to 1 bar cold? also sorry to sound thick but what is the f and r and how would i...

Hi my prv seems to be leaking at about 2.7 bar so i am looking at replacing it.is it something a novice can do? i think i just need to drain the boiler usung the prv then unscrew and replace or is there more to it than that ....

no unfortunately i cant there is some under the bedroom floor. i am guessing thats where you think i should be looking? also i am concerned with the fact i only had new rads fitted 8 weeks ago and pressure was fine before that the problem has only become noticeable in last 3-4 weeks

i normally keep pressure at 1.5 bar but it is losing approx 0.5 bar every 24-36hrs i was initially told it could be prv but that doesn't seem to leak unless the pressure goes up to near 3 bar and then it comes out fairly quick but i guess thats its job at that pressure. also i checked...

yeah it is rising it goes up aprox 1 bar when heating is on.

my biasi 24s is losing pressure and somebody has suggested repressurizing the expansion vessel can anybody point me in the right direction on how to do this or should i get a corgi guy in? cheers

also i have spoken to the guy that fit my rads and he says to try re-pressurising the expansion vessel or replacing it. is this something a novice like myself could do? if so where do i start.... how would i know if this was the prob before i start?

sorry what is the AAV? yeah he did use copper pipes and soldered joints and i did think it was a bit too much of a coincidence with the new rads i think i prob going to have to get somebody out then but they will prob charge me a fortune to diagnose it

thanks for the advice thats what i was afraid of as we have just had wood flooring fitted i didnt want to go down that route. is there any other think that may have gone wrong in the boiler as i have checked the prv using a similar method to what you have mentioned but there is nothing...

hi i hope somebody can help me. i have i biasi 24s combi boiler which is losing presure all the time (drops from 1 1/2 bar to 1 bar in approx 36hrs) and i cant find any leaks anywhere i recently had some radiators replaced and also some new installed approx 7 weeks ago the. i was told to check...