Recent content by PaulJD220

Cheers! I have narrowed it down to the following 3 pumps: 46497 Stuart Turner Monsoon Standard 2.0 Bar Single Pump (Positive head) Grundfos UPA 15-90N (160) Domestic Home Booster 240V ShowerPowerBooster

My supply is already very unbalanced due to all my cold taps being fed from the mains which is high pressure, I want to balance it by using a pump on the hot feed from the cylinder... I was looking at a surrey flange to deal with providing the air free feed to the pump and the normal feed to...

Cheers for your Prompt Response! I was looking at the monsoon pumps They seem a bit pricey but i guess your paying that premium for quality.. Negative or positive head system pump? Also Would a surrey flange be needed if i'm just supplying the hot taps? Thanks

Hi all, I'm looking to increase the pressure of the hot taps throughout the house as at the moment it's pretty pathetic even though I've installed low bar taps, I have a Gravity fed hot water tank with a head hight of only around 175cm. Would i be able to install a single impeller pump...

Thanks a lot, appreciate you're help.

Ok, Here it is :

Thanks for the prompt responce. The heating can be put on by itself but as you can see the old timer only lets you time one or the other or both at the same time Here's another pic showing the mid position valve and pump in case it helps

I'm attempting to fit a new Drayton Lp522 programmer in place of my very old timer switch (pics below) to give me more flexibility for timing the HW and CH to come on at different times I thought it would be a straight forward job but I'm a little confused why there are bridge connections in...