Recent content by Pdeemo

Thanks Terry, the fuel is beans, but there's the odd piece of flat grey slate type which, when at the pit we described it as dirt, but that's only slightly larger than a bean. Nothing that I would consider large enough to bridge. What I can't understand that it bridges the gap and holds the...

Terry thanks for the reply, I'm sure it's a fuel problem. I wanted to rule anything else out first, can't think of what else I could do now. How big is what my friend? The boiler is a TRG 60.

Over the last few days, tried regulater plate in all the different holes, fire will only stay in for more than 6 hrs when on widest setting bottom hole. This morning the fuel had bridged across the gap when I declinkered, but not due to clinkers, no fuel dropped, I was able to clear the whole...

What you have are Hager switches with a neutral loop connection. Used for having the neutral at the switches as many new lighting fittings do not have a facility for 3 plate wiring. So basically you have standard two way light switches with an extra connection for neutral loops. Dangerous in the...

Will do, I'll let you know.

I've had these Boilers for the last 40 years with very little problems. Due to bad fuel not burning well I have had bridging problems in the hopper. I have adjusted the throat plate for larger gap, (bottom hole) which has cured my problem of keeping the fire in overnight. But now I have to turn...