Recent content by PeedOftec

  1. P

    What is "head" and what isn't "head"

    Ha..just found out what the ignore button does... Very useful..😉
  2. P

    What is "head" and what isn't "head"

    Hahaha! Lol.... In a hurry to get somewhere were we.. loL See previous post.. :D
  3. P

    What is "head" and what isn't "head"

    ...or use Grabbit & Scarper Plumbing Co. and suffer a long slow painful lingering cancerous death overs years. ... mmm... Thank goodness for Google otherwise I would never have found this site and been able to take on board the good advice given here. :D
  4. P

    What is "head" and what isn't "head"

    Exactly! Unfortunately far too many do and blag their way out of it... and expect to get paid... Thank goodness for Rogue Traders... 😉
  5. P

    What is "head" and what isn't "head"

    Excellent on Google though. Do you test your GP when you visit him :lol: If I had cause to I would... Never accept anything you are told, or read, as gospel... Get a second opinion. From the positive feedback I have got on here it proves the advice I got from the plumber was wrong.... and...
  6. P

    What is "head" and what isn't "head"

    No, Darcy-Weisbach equation is pressure!! You're getting the two mixed up fella!! That's why I would never make a plumber.. ! :)
  7. P

    What is "head" and what isn't "head"

    This is another occasion where he should have known how to apply the Darcy-Weisbach equation. This guy seems to know what he is talking about:- http://www.johnhearfield.com/Water/Water_in_pipes2.htm
  8. P

    What is "head" and what isn't "head"

    Interesting.... Would it work if the cold feed was 22mm and the vent say 8mm Have you any thoughts of a way around it Jeff. Is it possible/acceptable to put a non return valve on the vent pipe?
  9. P

    What is "head" and what isn't "head"

    I'm sure they do apply but you are quite right, you DO need the experience too. However, when the system you install DOESN'T work, even after 35 years experience, you need to know the theory behind it all too. Again, I don't profess to know but I'm learning rapidly after my experiences with...
  10. P

    What is "head" and what isn't "head"

    Haha... funny as.... Has he opened an office in Hartlepool by any chance? I wont even start to mention Reynolds numbers!! Or the Colebrooke or the Haaland equations.... or in the UK the Hazen-Williams equation I believe. I know of them... I don't know how to apply them tho.
  11. P

    What is "head" and what isn't "head"

    I start to worry when they hesitate and either scratch their heads or hold their chins and say questioningly "The bigger one?"
  12. P

    What is "head" and what isn't "head"

    My standard "grannys socks" question for plumbers when they come through the door is "If I run a 28mm pipe from the tank in the loft and put a nozzle on the end aka a tap, and an 8mm pipe from the tank in the loft to the another nozzle.... which will spray the water the furthest... or put...
  13. P

    What is "head" and what isn't "head"

    I won't rise to your cheek about homework... That is my thought exactly... so why do several "plumbers" say "Ooh no,... don't put your hot tank right up under the cold water feed, there will be no head to feed the hot tank" Maybe these "plumbers" need to go back to school and do some...
  14. P

    Expansion vessel in Gravity feed system-Advice needed please

    Why does he think it will? What are his reasons? The size of tank will not affect the pressure in the system unless the water level is increased, then you may as well just lift the small tank higher. It is a common misconception the bigger the loft tank the greater the pressure in the system...
Top