Recent content by penpych

THANK YOU EVERYONE down to the local plumb shop tomorow crack of sparrows only been on this site a few days but its tops thanks again

one of these is fitted now but it has just pulled of off the lead pipe completely. allowing water to to pour every where still there are some nice ice sculptures forming i have turned water of for tonight, when i had a look the lead pipe has ptfe tape around it some potcher as we call them...

did you have the correct disc in for cutting you do need a cutting disc the shops sell disc cutters with a grinding disc not a cutting disc

HI hope someone can help im a competent plumber but have done no work on lead pipe. i own a house that i rent out it has an out house that has water to it coming from a lead pipe and is then conected to copper pipe my problem is that i have a serious leak from this connection i have...

Bacho TOP QUALITYjavascript:emoticon(':D')

make sure you DRAIN the rad completely otherwise black water will pour out every where guaranteed bucket under one side open valve dont forget to take the air bleed screw out after a few pints has drained out as this if left in position will cause an air lock which when the air does go in will...

hole saw is good go in from the acrylic side if you go in from underneath the acrylic could splinter

Thanks for your time,ive tried one but when using it it is hard to see the cut line with the swarf getting in the way. it has to either one of the above.

HI I just stumbled across this site 2mins ago.javascript:emoticon(':lol:') Hope someone can give a bit of advice i need a saw that can cut out curves in alluminium approx 2mm up to 6mm looked at a scroll saw but they all talk about cutting wood can they be bought to cut alli? would a band saw...