Recent content by petrolheadparr

Apart from making a horrendous noise when starting (sounded electrical) the old PCB has fired the old best up and it appears to be working for now???

I will reconnect the old PCB and get the code, give me 5

The new kit is part number 157928 if that helps? This is obviously a NEW style retrofit kit... but how does it spark?

I didn't write the code down but looked it up on here and on several other websites which all came back as a PCB failure.... (I've been on holiday and returned to the problem and decided to fix it now) so i bought a new one! does anyone know the answer is everyone just pass comment on what i...

The display gave a PCB fault code, i bought a brand new "kit" which is listed by all listings i can find to work with my machine?????

So ive diagnosed my heating system to be the PCB from the error code displayed, i ordered the new style Retro-fit PCB from ebay and i can't see how this is going to work???? the old was is black and has a single pin plug whole on the front of the PCB which obviously controls the spark.... The...

Can anyone point me toward a fitting guide on how to change the DHW thermistor? Ive fitted a new Diverter and head a few months ago and all has been well up until i started to display H£ fault this morning :-(

Can anyone point me toward a guide on how to fit a DHW thermistor on an ideal HE24? Thanks

Im in Nottingham

I didn't realise i could get it on wrong? could i have put it in upside down? I have now turned off the cold water in and its now working as it should but now stays on "C" when the controller is turned off. I turned the thermostat off (even thought the it should be off anyway) and it went to...

Ive just changed the diverter valve and head on an Ideal Isar M30100 and its stuck on "D".... The water is red hot but the central heating isn't warming up????? When you turn the boiler off and back on you can see the motor operating the valve and "c" is displayed for a split second then it...

Ive just done this job and now its stuck on "D".... The water is red hot but the central heating isn't warming up????? When you turn the boiler off and back on you can see the motor operating the valve and "c" is displayed for a split second then it moves back to "D"? bled the radiators...

firstly thanks for any advice you can offer! My Ideal boiler has been playing up recently and heats up the radiators regardless of the thermostat or timer switch settings. The hot water is still working fine and it switches from "C" to "D" as it should but never displays 0 as it should (no...