Recent content by phead

  1. P

    Odd problem With Zone

    Okay I linked it out and still had the same problem, so decided to disconnect the battery for to clear any volatile memory, and that fixed it! Left in full set all today without any problems. Thanks all.
  2. P

    Odd problem With Zone

    That sounds like a good idea, I'll give that a go thanks.
  3. P

    Odd problem With Zone

    Just tried that, it seems to have no effect, and the alarm just continues to beep never actually "setting". I'm guessing that either that zone was never setup right, as the first time its ever activated the system has done something to it? Would pulling the power+battery possibly reset it...
  4. P

    Odd problem With Zone

    I had a door contact fail on the alarm, it was sticking closed, giving it a tap released it so I knew that needed replacing. Before I could replace it I forgot it was stuck and walked past setting off the alarm by the one of the PIR's, ever since this happened that PIR is showing as active on...
  5. P

    Fitting a cylinder Thermostat

    Correct, with the CH on the cylinder thermostat would have no effect, I have no problem with the tank being heated when the CH is on, it does that currently so theres no change there. The problem is that this time of the year the CH isn't needed very often, but with the current setup either I...
  6. P

    Fitting a cylinder Thermostat

    I asked them for a price for fitting a cylinder thermostat, no more no less. How they did it would be up to them. Is that a "ridiculous" request, or are you jumping to conclusions? Could anyone explain, without blowing their top, why a cylinder stat could not be added in the manner...
  7. P

    Fitting a cylinder Thermostat

    The extra zone valve might be useful, but I would prefer not to do too much until I do other work in the future. I just need to check that the connections are correct to fit that in for now. I did want to get a plumber to fit it as a simple job, of the five I called 3 didn't bother to...
  8. P

    Fitting a cylinder Thermostat

    I'm looking to fit a cylinder thermostat to a system that doesn't currently have one fitted. The current setup is quite old and just has a single pipe loop passing through the boiler and the cylinder, that is extended to the radiators via a 2 way value when the main thermostat demands it. The...
Back
Top