Hi no the sensor lights stopped working so I thought it was the lights so I replaced two lights either side of my front door.
One of which was a replacement for an original light.
So my thoughts were that I could wire another one in on the other side of the door.
So I found the original cable...
Hi terryplumb
Yes there’s a new cable to the new light via the wire from the switch to connector for both light cables.
The voltage on the right switch the com is 240 when the switch is on the brown in L3 is 240 when in off position it’s 0 the blue is reading over 100 volts.
This using a...
Wires revised
The blue and brown wires are the ones going to the lights could the switch be at fault don’t ridicule as the blue is connected to a separate block.
Switch on the right is for outside light the other is for porch light works fine.
Also still getting over a 100 bolts coming through...
Hi I have wired a new light off the old existing light but the switch for the outside lights won’t power the lights on.
The other switch controls the porch light which is also controlled by a 3 way switch in the hallway.
I lost the picture I took when I disconnected the main cable to the...