Hi, after some advice on how to secure a pull up bar for home gym use onto the garage wall. Inside the garage is breezeblock. Would I be able to use drill through this and into the brickwork behind to secure the brackets of the bar? Or should I look at another way of mounting it?
No he definitely said that it woulnd't need servicing for 2 years and that it was covered under a 2 year warranty and the boilers were really reliable.
I don't know how it was originally filled. The WB engineer couldn't work that out either. There is no other filling loop anywhere.
OK I rang WB and they took me through the same procedure to fill the boiler. He said that they would send an engineer out next Tuesday as it sounds like the valve is blocked. He suggested that a yearly service was needed to stop this happening again.
The boiler was only installed February...
i followed the instruction - line the arrow on the key with the unlocked padlock symbol and insert key fully then turn the key towards the locked padlock symbol (it wont go beyond this its definitely locked in place) then i unscrewed the greyish knob .
Hi
The boiler pressure bar is showing 0 and it won't fill up when I try putting the key in and turning it to lock then opening the plastic square screw. When I turn the plastic screw there is no sound of water filling the boiler.
Am I doing something wrong?
Thanks.
Hi I need some advice please.
I want to replace my back garden fencing. Currently I have 6x5 waneylap panels nailed to 5ft wooden posts which are
concreted into the ground. These panels are now falling apart in places.
I have 8 panels travelling the length of the garden on the left...