Thanks for that. The alarm was fitted professionally a few years ago now. Sounder and LED both used to work but all of a sudden the sounder has stopped working.
Hi,
my burglar alarm has developed a fault. The set up is fairly standard I believe - an internal alarm unit and a box on the outside of the house.
If I trigger the alarm then both the internal alarm (inside the unit) and the blue flashing light on the outside of the house go off but...
Well it came with a connector that has a 6mm push fitting on one side and a 1" ID thread on the other but since I'm trying to mate to a 15mm isolating valve then this doesn't seem to help too much. Thanks for the link.
PS, the isolating valve is compression both sides...
Hi,
I've recently taken delivery of an American style fridge freezer with an ice maker that needs plumbing in. The FF came with a good length of 6mm OD plastic pipe. I have to marry this up to a standard 15mm isolating valve (with handle). I'd appreciate any advice on the simplest way of...
Hi fireman
If I've understood you correctly you're asking me to disconnect L1 and C on dimmer 2 and check dimmer 1 - in this case only the ceiling light comes on and not the wall lights.
Thanks to you both for the suggestions.
I've wired things up as fireman suggested i.e.:
red and black cables from previous working ceiling light to L1 and C respectively of dimmer 1
jumper cable between dimmer 1 C and dimmer 2 C
2nd red cable (previously unused) to dimmer 2 L1
Now...
I have a dining room with a (working) ceiling light. Recent decorating has exposed wiring for a couple of wall lights previously hidden behind the wallpaper and I'd to get these working as well. There appears to be standard 2 core + earth cable coming down to both of the wall lights. There's...