Recent content by PJCJ

When a hot tap is switched on the piston on the diverter valve moves out and stops just shy of the microswitch - a scew driver blade in between the piston cap and switch sets the hot water running as per normal. Can't face kneeling under the boiler whilst the family all take showers...

Would welcome advice as to what product to use to flush/clean the system. Something I can get from local stores too. Many thanks

Ollski You were quite right - thanks you for the advice which is much appreciated. New fan much better product as it has a built in vibration damper, the old one was 6 years old and rather noisy.

Ollski Thanks for the suggestion, it spins quite freely - but am I missing your point? Thanks

Venturi cleaned off, looks OK. Fault remains. The fan seems to take longer than previously to get going.

ItsOverFlo Thanks for that, will have a look

The boiler failed last weekend with "air pressure fault" indicated. One of the upper silicon pipes had fialed but all was well after replacing this and the air pressure switch. This weekend the boiler has developed an intermittant air pressure fault but with no obvious cause. According to the...